Step by step guide for getting rid of car scratches


The resistance to scratching is really high in the cars of the modern era but still, there are chances of getting scratches on cars.

The reason why scratches are inevitable to avoid is that when the cars run at high speed on the roads, the small particles of road materials like small stones fly and hit the sides of cars resulting in hazardous scratches.

There are very effective car scratch removers available in the market and you can check out these car scratch remover reviews. Here is step by step guide for you to remove the scratches of your car.

Step 1: Abrasion

If you got a scratch on your car then you must be willing to lean into your fender if you really want to remove it by yourself. The idea is very simple. All you need to do is to make the scratch even worse than before to completely remove it later.

It seems wrong but it really works in this complete strategic method. You surely want your car to look beautiful again. So, you must apply this step first before moving to other steps.

Step 2: Priming

The combination of aerosol cans and sandpaper is required in this step. You use the black sandable primer at first which fills the sandpaper scores with a black three-layer coating.

It is a simple step and all you need is the time for painting. You must apply the first layer of paint within two minutes then you should wait for 10 minutes and then again apply the paint for 2 minutes to get the proper results.

Step 3: Uniform Coating

Uniform coating is the next step and it needs more aerosol cans as used by the primer. Every time you apply a coating, it seals the layers of pigments.

Do not use the construction paper for smoothness, you should use deploy wet sanding with the 1500-grit. The last coat almost finalizes the whole process.

Step 4: Work Results

It takes at least one night to dry the coating naturally for more effective results and then you can apply the rubbing compound to polish and shine the work.

It takes a couple of days to blend in with the natural color of the car because the other areas may have a decade’s old color and the area you treated have a new coating.

So, do not apply a lot of layers of paint otherwise you will ruin the uniformity of paint.

The evolution of car batteries


Can you imagine not having a key-ignition starting in your car? Well, that was the reality some 60 years ago. Up to 1949, the automobiles were a luxury which unfortunately came with challenging starting options. If you want to find out more about car batteries, check out this link for the latest car battery reviews. In the meantime, let’s see how car batteries evolved over time.

Before key ignition starting

The first automobile was built at the very beginning of the 19th century, by a Frenchman named François Isaac de Rivaz. The vehicle was running with the help of an internal combustion engine, which was fueled by hydrogen. By the end of the 19th century, another inventor finds the way to upgrade this initial model of the car. Siegfried Marcus designed the first internal combustion engine that was using the gasoline instead of the hydrogen. His car was a significant point of influence for later models of cars. However, the first models of vehicles didn’t have batteries, because of the limits of electric systems in the cars.

The first lead-acid battery was invented in 1859 by Gaston Planté, a French physicist. Although this type of a car battery came with limited performance (a low energy-to-volume and energy-to-weight ratio), the battery was powerful enough to supply the first vehicles. The importance of Planté’s invention was in the fact that lead-acid battery was the first rechargeable battery invented.

Changing direction with Ford automobiles

By the early 20th century, a car industry of the time came out with great inventions. The number of new car models was lavishing, and the industry was moving fast forward. Several key car manufacturers were competing for market’s attention, which causes a significant number of car batteries

When an electric ignition was designed as a primary vehicle starting system, car batteries was gaining more attention from the manufacturers. With the improvements in car’s electrical system, the battery became an important part of the vehicle. The first starting systems were designed with a 6-volt and positive ground system batteries. The car’s chassis was directly connected to the battery terminal, which was positive at the time. Today’s cars, however, are running on the negative ground system batteries.

The changeover: from 6-volt to 12-volt batteries

The 6-volt batteries were roughly used up to 1950’s. Since the first vehicles didn’t require much electric power to work, there was no need for battery improvements. However, there were some exceptions to the rule in the mid-1960’s and 1970. Volkswagen’s Beetle and Citroen 2CV were still using 6-volt batteries, although other vehicles switched to 12-volt batteries.

best car batteriesThe changeover was initiated when companies started producing bigger engines with higher compression ratios that required more power to start. The 12-volt batteries were again replaced in 1990’s when the 42V electrical system became a standard for cars. The reason for this change was in the fact that manufacturers intended a more powerful electrically driven accessories which would allow lighter wiring harnesses.

How to Maintain Your Car


A lot of people today are buying cars every few years. What they don’t know is that they can maximize the mileage of their car in so many ways. For instance, make sure that you change oil regularly. This will guarantee that parts are well lubricated. Also, be sure that you use only the best gas to your car. Can you imagine having a sports car but not having the best gas? Next, it is also a good option that you have a mechanic who you can trust. This way, they can fix the small problems in your car early on.

Is it worth it to switch to a hybrid car?


Is it worth it to have a hybrid car? Hybrid cars today are becoming popular and for good reasons. You can save a significant amount of money on gas if you invest in a hybrid car. In contrast to the petrol powered cars, hybrid cars can also help save the Mother Earth.

Unfortunately, it costs so much higher. For a lot of people, this is not something worth it for now. Eventually, you can expect that technology will become cheaper that these cars will ultimately become cheaper. As for now, you need to reconsider your finances before you buy one.

Tips when buying used cars


A lot of people don’t buy brand new cars. And in reality, this is a practical move. Why not? You don’t need a flashy car in order to reach your destination. But of course, you have to deal with wear and tear if you opt to buy the used cars. What you want to do is to make sure that you have the right knowledge when it comes to buying used cars.

First, always check its wear and tear. Aside from going under the hood which is the job of a mechanic, you want to check the number of miles that it has traveled over the years.

How Can You Maximize Old Cars?


If you opted to buy an older car, it is important that you maximize it. In order to maximize an older vehicle, it is imperative that you know how to maintain it. Be sure that you have a mechanic that can take a look at even the minor concerns. Also, be sure that you are preventive when it comes to dealing with problems. It is better to also have a maintenance schedule for the old car in order to make sure that it runs smoothly. The only problem would have to be the cost of the repairs. There are instances when it is not really worth it.